C00-BK-1
Genuine Australian made TYCAB 00 B&S (64.15mm²) battery and starter cable, ideal for use in dual battery systems, caravans, trucks, winches or any other auxiliary power application up to 292amp*
Part # Prefix: C00
Sheath Colours: Black
Lengths: By the metre (Cut to length from 30m roll)
* Refer Specifications and derating factors
AMP Rating at 30°C: 292amp (JASO D609 derating factors apply)
Tycab Code: ABC191003
Nearest AWG: 00
Strand #/Size: 798/0.32
Nominal Area: 64.15mm²
Insulation Thickness: 1.7mm
Electrical Resistance at 20°C: 0.3 ohm/km
Nominal O.D.: 14.5mm
Mass (kg/100m): 70.1
Conductor: OXYGEN FREE Plain Copper Wire to AS/NZS 1125
Insulation: V90 degrees Celsius PVC to AS/NZS 3808
1 x Cable = 100% capacity (292amp)
2 x Cables = 80% capacity (234amp)
3 x Cables = 70% capacity (204amp)
4 x Cables = 60% capacity (175amp)
5 x Cables = 55% capacity (160amp)
6 x Cables = 50% capacity (146amp)
7 x Cables = 50% capacity (146amp)
30°C = 100% capacity (292amp)
40°C = 90% capacity (263amp)
50°C = 76% capacity (222amp)
60°C = 60% capacity (175amp)
70°C = 45% capacity (131amp)
Battery and starter systems
Dual battery systems
Caravans and 4WD's
Auxiliary power applications
Charging systems
Trucks
Winches
Download Sizing Guide:
Voltage Drop for 00 B&S Cable:
To calculate the voltage drop of 00 B&S copper cable, use the following formula:
Voltage Drop = Length x Current x 0.017
Length = Total length of cable in metres.
Current = Current draw (amps) through the cable.
Area = Cross sectional area of the copper (in this case 64.15mm²)
Notes:
Formula only applies to copper at 25°C, voltage drop increases with both ambient and cable temperature, at approx 0.4% per °C.
0.017 - This multiplication factor only applies to copper
Example for 00 B&S:
How much voltage drop over 10m of 00 B&S with a current draw of 292A?
Divide this by 64.15 (cross sectional area of 00 B&S - mm²)
You will have a drop of approximatley 0.77 Volts over the 10m length