No Products in the Cart
Part #: LED69###
Function: Marker Lamps
Size: 120mm x 64mm x 22mm
Voltage: 12-24V
LED Qty: 4
Cable: 30cm
Wire Colours: Brown - Power, White - Earth
Material: Lens - PMMA; Bracket - ABS
IP Rating: IP67 (100% Waterproof)
Approvals: ECE/ADR
Fitting Instructions,Screw Cap Removal:
Either use one of the supplied screws or a small screwdriver to push them out from the rear of the lamp. Surface mount onto flat surface horizontally with screws, run wire through hole in fixing surface. Then, after fitting the lamp, push the screw caps back into place. Please refer to ADR 13/00 for mounting instructions.
Cable Type | Nominal Area | Outside Diameter | Amp Rating @ 30°C |
---|---|---|---|
8B&S Single Core | 7.71mm² | 5.5mm | 74A |
6B&S Single Core | 13.50mm² | 7.2mm | 103A |
4B&S Single Core | 20.26mm² | 8.3mm | 135A |
3B&S Single Core | 26.45mm² | 10.2mm | 168A |
2B&S Single Core | 32.07mm² | 11.3mm | 188A |
1B&S Single Core | 39.55mm² | 12.1mm | 210A |
0B&S Single Core | 49.00mm² | 12.7mm | 246A |
00B&S Single Core | 64.15mm² | 14.5mm | 292A |
000B&S Single Core | 83.19mm² | 16.4mm | 335A |
8B&S Twin Core | 7.71mm² | 7.1mm x 12.5mm | 59.2A |
6B&S Twin Core | 13.50mm² | 8.8mm x 16.0mm | 82.4A |
4B&S Twin Core | 20.26mm² | 10.3mm x 18.6mm | 108A |
2B&S Twin Core | 32.07mm² | 13.4mm x 24.6mm | 150.4A |
2B&S Welding | 35mm² | 13.1mm | 155A |
0B&S Welding | 50mm² | 14.9mm | 185A |
00B&S Welding | 70mm² | 17.0mm | 240A |